It is therefore obvious to combine different ores and their properties with one another. However, this only works with the same ore types , Iron Ore and Gold Ore cannot be fused together.
Unfortunately this is random, 10 Dried Iron Ore and 10 Scorching Iron Ore do not automatically result in 20 Dried Scorching Iron Ingots .
(just like when crafting items)
Because of this, I’ve made several attempts to see how it differs when the ores are melted down either individually or as a pile. I have also tried to stretch special ores in order to save raw materials.
The result was the following:
30 x Veteran Iron Ingots .
The result is not quite as good as it could be, this could have been better with a total of 4 different properties which I was using.
In the worst case scenario, it could mean the loss of rare ores if they are all melted down together.
This time I put the ores in a box and only removed one of each type and melted them into 3 iron ingots . I did this 10 times to get 30 iron ingots like in the first test .
The following ore ingots were produced:
3 x Iron Ingot
6 x Scorching Iron Ingot
6 x Dried Iron Ingot
9 x Ancient Veteran Iron Ingot
6 x Scorching Dried Iron Ingot
Although this method is more complex, the overall chances of obtaining special iron ingots are better.
In this test I melt normal Iron Ore and Dangerous Crocodile Iron Ore in a 1:1 ratio.
First I take 10 pieces of each variety and melt them together.
The result is surprisingly 20 Dangerous Crocodile Iron Ingots , which I didn’t expect, so I repeat the test and this time get 20 Crocodile Iron Ingots .
This shows that the desired result is not always achieved, but that it is possible to reproduce rare ores without bugs or slips.
After 10 passages I have the following Iron Ingots produced:
10 x Iron Ingot
4 x Crocodile Iron Ingot
2 x Crocodile Dangerous Iron Ingot
2 x Dangerous Iron Ingot
This test clarified exactly, that it is a function of chance which properties the produced Iron Ingots obtain. From the desired iron ingotsI only received 4.
However, the previous test showed that it is not guaranteed that the iron ingots produced will have the desired properties.
For this I have merged normal Iron Ore with Dried Iron Ore in the ration 9: 1.
After 10 rounds each with 9 Iron Ore and a single Dried Iron Ore , I received 100 normal Iron Ingots as a result.
So I would say that the less ore with properties in the mix, the less chance there is of a successful result.
As before, the ores are stowed in a box. And again I take 1 ore of each type and melt them down in a total of 25 passes.
From 25 Crocodile Dangerous Iron Ore , 25 Dragon Crimson Iron Ore and 25 Ancient Veteran Iron Ore, I have obtained the following Iron Ingots:
18 x Iron Ingot
6 x Veteran Dragon Dangerous Crocodile Iron Ingot
6 x Veteran Dragon Iron Ingot
3 x Crocodile Dragon Dangerous Iron Ingot
3 x Dangerous Ancient Veteran Iron Ingot
3 x Dangerous Veteran Iron Ingot
3 x Dangerous Crimson Iron Ingot
3 x Ancient Crocodile Veteran Crimson Iron Ingot
3 x Dragon Iron Ingot
3 x Ancient Crocodile Iron Ingot
3 x Crocodile Iron Ingot
3 x Veteran Dragon Crimson Iron Ingot
3 x Crimson Veteran Iron Ingot
3 x Ancient Dragon Crocodile Iron Ingot
3 x Crimson Dragon Iron Ingot
3 x Dangerous Dragon Veteran Ancient Iron Ingot
3 x Crocodile Crimson Iron Ingot
As you can see, I have a colorful collection of Iron Ingots as a result, which can now be used to create special items.
However, I would like to point out that the manufactured item can, but does not have to, have the desired properties .
These are examples of possible combinations. Improved items can now be created
from these iron ingots . For example, I was able to make this amulet after a few attempts, using Dragon Veteran Iron Ingots and Scorching Dried Glass .
Due to their frequency, it is to be got over if Iron Ingots have not received the desired combined abilities, these can be used to unlock the cards or for construction projects.
As was shown in the fifth attempt, normal iron ingots can also be made from good ore , which can be annoying if you melt down your entire ore reserves in one step.
In the case of rare properties, I can therefore only recommend melting them down individually, because melting down is random. It is not guaranteed that the desired result will be achieved the first time.
Therefore, you should melt down your ore one at a time in order to have as many attempts as possible.
That’s all we are sharing today in Craftopia Tips for Melting, Combining and Stretching Ores, if there are anything you want to add please feel free to leave a comment below and we’ll see you soon.
Credit to N4P4LM
- Craftopia Useful Info Guide (Island Layout , Ores Affinity , Loot Drops , Dungeon and More)
- Craftopia Spell Guide (Characteristics & Possible Play Styles)
- Craftopia How to Fix Multiplayer & Coop Working
- Craftopia How to Play Co-op With Friends (Using Hamachi)
- Craftopia Ultimate Fishing Guide