Basic workbench, smelter, and anvil crafting recipes and how to make steel in Industriworks.
You can use smelter to make charcoal (500 K):
Glass (800 K):
Bricks (900 K):
You will need metals. Metals are made from ores on crucible. First, make a raw crucible:
And smelt it on 1400 K:
You can open crucible and put ores into in. Cassiterite, limonite, magnetite, and malachite:
Let’s smelt cassiterite:
Bronze bar is made from 3 copper nuggets and 1 tin nugget:
Bars can be splitted into nuggets:
And nuggets can be melted into bars:
You will need an anvil. You can smelt limonite that can be found on lakes and make anvil:
You need an hammer to craft things on anvil:
Hammer can be made only from pig iron or steel.
With anvil you can make pickaxe, shovel and axe parts:
then make corresponding tools:
You can also make shears. Shears is used to gather leaves and flowers:
Shears can be made only from steel or bronze.
You can make saw that is used to mine raw stone:
Saw can be made only from steel.
To make steel you need to build special smelter from fireclay.
You also need flint and flint that is used to make fire:
Coal heaps are fuel for this furnace. It can be made from charcoal and coal:
You will need to build this 3x4x3 construction:
3×3 blocks of firebricks.
Same but center is coal heap.
A hole for steel.
A hole for pig iron:
Set the fire to the coal heap:
Drop some pig iron bars into fire and collect molten steel with crucible:
Consider that molten steel is liquid. You can clear it with crucible too: