For Hardspace: Shipbreaker players, this guide will explain to you how to access the emergency cut off switch without ever setting anything on fire.
Getting to the emergency shut off valve without setting anything on fire
1) Remove the nozzle as you always do and throw it into the barge
2) Grab one of the coolant canisters located next to the nozzle
3) Without letting go of the canister, smash it against the hull of the thruster
4) The canister is now leaking coolant. Place the canister next to the 4 fuel lines and freeze them (don’t worry, this will not damage anything)
5) Make sure all four fuel lines are frozen next to their cutting points, then throw the coolant canister into the incinerator
6) Melt the four fuel lines’ cutting points with the stinger (unless one isn’t frozen anymore, in which case return to step 2)
7) All four fuel lines are now safely cut, you can access the emergency cut off valve without the risk of getting burned 
8) PROFITSSSS
That’s all we are sharing today in Hardspace: Shipbreaker How to Safely Dismantle the Quasar Thrusters of the Atlas Class Ships, if you have anything to add, please feel free to leave a comment below, you can also read the original article here, all the credits goes to the original author Seb Renard
Related Posts:
- Hardspace: Shipbreaker How to Safely Salvage the ECU guide
- Hardspace: Shipbreaker How to Safely Deal with Hazards
- Hardspace: Shipbreaker Solutions for Bugs & How to’s
- Hardspace: Shipbreaker All Badges List Guide
- Hardspace: Shipbreaker Tucked Tale Achievement Location Guide
No need to use the coolant – waste of time. Tether the thruster to the wall before you cut the fuel lines. When you cut the fuel lines, the thruster will be immediately removed by the tether. The fire won’t have had time to get very far and you just go right down the middle to the fuel shutoff. Keep your lights on, because there are sometimes obstacles inside the thrusters.